01442 823 123 enquiries@arrowvalves.co.uk

3/4" Hose Union Below Ground 25 MDPE

Where a Standpipe is unsuitable, this below ground enclosure with hose union tap offers an inconspicuous alternative. The supply pipe is normally 750 mm below the surface. The telescopic enclosure facilitates installation at depths between 640 and 780 mm. A full-bore Servicing Valve is fitted inside the tube at the base. A conventional stop key can be used to isolate the supply. Access to the hose union tap is via a sturdy plastic lid, capable of withstanding 13 tonnes. The lid has a locking mechanism and a key supplied with each unit. A degree of frost protection is provided with thermal insulation and a frost resistent tap. During the winter, it is recommended that the Servicing Valve is shut and the tap left open.
Product Code: HUBG20x25
Postcode

Availability: In stock

£372.00

Additional Information

Hose Union Products - Fluid Category No
Hose Union Products - Installation No
Hose Union Products - Material No
Hose Union Products - Retractable Shelf Yes
Hose Union Products - Inlet Size DN25
Hose Union Products - Outlet Size DN20

Application

Where a Standpipe is unsuitable (e.g. models SPED and SPBA), this below ground enclosure with hose union tap offers an inconspicuous alternative.

Downloads & Resources

Specification Clauses

Every external Hose Union Tap shall be located in a telescopic below ground UPVC enclosure – model HUBG - as manufactured and distributed by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The outlet valve shall be a frost proof angle pattern spherical valve. The assembly shall include a servicing valve to enable maintenance of the assembly and two connections shall be provided for continuation of the line. The assembly shall have DZR adapters for MDPE pipe. The lid shall be capable of withstanding 13 tonnes and a key shall be supplied to secure shut. The unit shall be supplied via a dedicated Break Tank with type AB air gap or AUK1 cistern.