Booster Set
Part Number: BPE
Product Overview
BPE 3-5 / 3-7 / 3-10 / 5-4 / 5-8 / 5-10 / 5-16.
Booster pump set packaged on a stainless steel base supplied with pressure vessel and ancillary controls. A separate cistern (tank) is required to supply the set.
Specification Clause
BPE – Booster Set (Variable Speed Pump up to 1.2 lt/s)
A Booster Pump Set shall be installed – model BPE3-71,2 - as manufactured and distributed by Arrow Valves Ltd - Tel 01442 823123 www.arrowvalves.co.uk. The pump shall be centrifugal with stainless steel impellors and housing. The pump speed shall be varied by an integral inverter to provide a constant pressure. The duty at 100% output shall be 3.0 bar3 @ 0.9 lt/s and be controlled by a pressure transducer, which is damped with a 24 litre pressure vessel. The unit shall feature a stainless steel base plate and be acoustically attenuated by anti-vibration feet and a stainless steel braided flexible hoses.4
Amend as required:
[1] 3-5
[1] 3-10
[3] 2.0 bar (model 3-5)
[3] 4.0 bar (model 3-10)
Insert as required:
[2] LC1
[2] LC2
[4] The set shall incorporate a level controller with a 3 stainless steel electrodes. The electrode holder shall be fitted to the lid of a separate cistern to provide low level pump cut-out, which shall automatically reset once the cistern is sufficiently full. (LC1)
[4] The set shall incorporate a dual level controller with a 5 stainless steel electrodes. The electrode holder shall be fitted to the lid of a separate cistern to control the cistern filling via a solenoid valve and low level pump cut-out, which shall automatically reset once the cistern is sufficiently full. (LC2)
BPE – Booster Set (Variable Speed Pump up to 2.0 lt/s)
A Booster Pump Set shall be installed – model BPE5-81,2 - as manufactured and distributed by Arrow Valves Ltd - Tel 01442 823123 www.arrowvalves.co.uk. The pump shall be centrifugal with stainless steel impellors and housing. The pump speed shall be varied by an integral inverter to provide a constant pressure. The duty at 100% output shall be 3.0 bar3 @ 2 lt/s and be controlled by a pressure transducer, which is damped with a 24 litre pressure vessel. The unit shall feature a stainless steel base plate and be acoustically attenuated by anti-vibration feet and a stainless steel braided flexible hoses.4
Amend as required:
[1] 5-4
[1] 5-10
[3] 1.5 bar @ 1.5 lt/s (model 5-4)
[3] 4 bar @ 2 lt/s (model 5-10)
Insert as required:
[2] LC1
[2] LC2
[4] The set shall incorporate a level controller with a 3 stainless steel electrodes. The electrode holder shall be fitted to the lid of a separate cistern to provide low level pump cut-out, which shall automatically reset once the cistern is sufficiently full. (LC1)
[4] The set shall incorporate a dual level controller with a 5 stainless steel electrodes. The electrode holder shall be fitted to the lid of a separate cistern to control the cistern filling via a solenoid valve and low level pump cut-out, which shall automatically reset once the cistern is sufficiently full. (LC2)
Application
Applications where a large cistern is required.
Additional Resources