Jump to model:

 

Search by model No.:


Tamperproof Commercial Standpipe
Category 4

Part Number: SPBA

• Features & Benefits • Approval Certificate

 

Product Overview

Industrial and tamperproof Standpipe assembly with hose outlet for use in commercial areas. The Standpipe is intended for permanent fixture and houses a Reduced Pressure Zone valve (type BA device), which provides backflow protection to Fluid Category 4. The Standpipe is normally supplied with mains water from a buried supply pipe but can also be supplied above ground from the rear.

The Standpipe is supplied fully assembled and tested. A DZR brass compression fitting for MDPE is included and no additional parts are normally necessary - see Associated Products.

The Standpipe is supplied with a brass quick release hose connector, which is compatible with the Hozelock system.

Associated Products:

• Padlock (SP35/2.5)
• Pile - Can be buried in soft ground for mounting Standpipe
• Commissioning

 

Specification Clause

A hose union outlet shall be located in a tamperproof housing; comprising of a galvanised steel body, finished with a dark green nylon coating – model SPBA - as manufactured and distributed by Arrow Valves Ltd - Tel 01442 823123 www.arrowvalves.co.uk. The unit shall be suitable for Fluid Category 4 protection and feature a BA device. The unit shall incorporate a drain tap allowing the assembly to be drained when not used. When mounting in soft ground a hot dip galvanised pile shall be used with stainless steel fasteners. No below ground connections shall be made and a 2-pipe Tee Assembly installed in the lower part of the standpipe where the pipe is to continue. The tap outlet shall have a DN201 quick release brass plug and socket arrangement. A long weatherproof padlock shall be provided. The inlet shall be suitable for 252 MDPE3 pipe.

Amend as required:
[1] DN15
[2] 20 or 32 (22 or 28 copper)
[3] copper

 

Application

(Fluid Categories 1 – 4)
• Mini irrigation systems
• Dairies & food preparation areas
• Brewery & distillation plants
• Commercial & industrial yards
• Car washing & degreasing plants
• Garages & vehicle washing areas
• Wash down areas with chemicals
• General wash down - Fluid Category 3 or 4

 

Additional Resources

Tutorials:
• Hose Union Taps
• Notification
• Conservation

Presentation:
• Hose Union Taps Mini Presentation
Please see 'Required Viewers' page for assistance with viewing presentations.