01442 823 123 enquiries@arrowvalves.co.uk

1/2" Miniature Standpipe Ground 22 Comp

Tamperproof outside hose tap in stainless steel enclosure, with spherical type angled valve and hose connector. The SPTB has a hinged tap cover, which can be secured with a padlock, to prevent misuse or tampering. The permanent low level Standpipe is designed to be buried in soft ground (such as flower beds). The height from the outlet to ground complies with the Water Regulations. The outlet is horizontal, which is ideal for a hose pipe. The housing includes foam insulation, which provides a reasonable level of frost protection, which provides a reasonable level of frost resistance for the valves and pipe. The Standpipe features a Double Check Valve providing Fluid Category 3 protection. A servicing valve is also supplied and all serviceable components are accesible from the front.
Product Code: SPTB15X22C

Availability: In stock


Additional Information

Hose Union Products - Fluid Category Fluid Category 3
Hose Union Products - Installation Buried in Soft Ground
Hose Union Products - Material Stainless Steel
Hose Union Products - Retractable Shelf No
Hose Union Products - Inlet Size 22 mm
Hose Union Products - Outlet Size DN15


Model SPTB incorporates a Double Check Valve (ED device) and is suitable for Fluid Category 3 applications. This low-level standpipe is specifically designed for discreet flower bed installation- a hose can be attached. For installing on a hard flat sur

Downloads & Resources

Specification Clauses

Where indicated on the drawing, a Miniature Standpipe with Hose Tap shall be located in a compact stainless steel housing – model SPTB - as manufactured by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk.  The overall height shall be less than 300 mm.  The supply pipe shall be 25 MDPE – model SPTB15x25[1].  The assembly shall incorporate a servicing valve and Double Check Valve for Fluid Category 3 protection.   A weatherproof padlock with two keys shall be provided to secure the hinged lid – model SP35[2].  A stainless steel Hose Shield shall be provided – model HUSHIELD[3]. Amend as required [1] 20 MDPE – model SPTB15x20 or SPTB15x22 (22 mm compression) [2] Delete if not required or combination padlock available - model SPCP1 [3] Delete if not required