01442 823 123 enquiries@arrowvalves.co.uk

132 Low Loss Double Check Valve c/w SU

Double Check Valves (ED device) with DZR brass valve bodies suitable for most pipe materials. Flat-faced connectors allow direct connection to the pipe without the need for sealants or additional adapters. Oversize, high-flow Cartridges provide exceptionally low head-loss characteristics. E.g. pressure drop for the 15 mm valve at 3 m/s pipe velocity is just 0.1 bar compared with 0.5 bar for a conventional valve. This is especially important when used on non-boosted systems since mains water pressures are being lowered down to 1.0 bar (@ 9 lt/min) in many regions. Flat-faced union connectors with soft washers allow valves to be easily installed to new or existing pipes without the need to spring pipes apart. This system allows for numerous pipe systems – see below. Valves are demountable. Spring-loaded Cartridges with resilient seats provide positive closure, no water hammer and low opening pressure.
Product Code: EDSU
Shipping cost will be applied at checkout.

Price From: £35.00

* Required Fields

Additional Information

Fluid Category 3 - Powered No
Fluid Category 3 - Test Points No


Backflow prevention for fluids in Categories 1 - 3; Supply to flats and apartments - see Branch Valve; Hose union taps - see our range; Domestic washbasins, baths and showers; Water softening plant (common salt only); Primary heating circuits (houses only) - see CA Device; Hose union taps (houses only - inside property)

Downloads & Resources

Specification Clauses

Every Double Check Valve assembly shall be the exceptionally low head loss type – model ED132 - as manufactured and distributed by Arrow Valves Ltd - Tel 01442 823123 www.arrowvalves.co.uk. The pressure drop across the assembly at 3 m/s pipe velocity shall be less than 0.13 bar. The body shall be DZR brass and include flat-faced connections suitable for solder union connections.