Air & Dirt Remover – ADR546

Air and dirt remover for simultaneous seperation and removal of air and impurities from heating and chilled circuits. Dissolved air is released as the fluid passes through the stainless steel mesh within the unit. Air bubbles form at these localised low pressure points and subsequently they float to the top of the chamber. An Automatic Air Vent is fitted to the top of the chamber, which releases the air to atmosphere. Converseley dirt falls to the bottom of the unit, having collided with the internal mesh, where it can be drained as required (except 22 mm).

Sealed heating circuits; Chilled water circuits.

• Backflow Prevention No
• Powered No

Where indicated on the drawing an air and dirt eliminator shall be installed – model ADR – as distributed by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The unit shall have PN16 flanges with mild steel body and epoxy coating and have a full bore spherical dirt drain valve. The Deaerator should be installed to a low pressure point in the system such as prior to a circulation pump, or where practical, towards to top of the system.