Code: BPELC1 Categories: ,

BPE with Low Level Controller

From £3,495.00 £4,194.00 inc. vat

Description

Booster Pump Set packaged on a stainless steel base supplied with pressure vessel and ancillary controls ready for installation. A separate cistern (tank) is required to supply the set. The set is approved for drinking (wholesome) water applications. The primary purpose is to boost the water pressure where the maintained mains supply pressure is less than 1 bar or where significant water storage is desired (e.g. 15 mins). The set may also be used for Fluid Category 5 backflow protection when supplied via a tank with a Type AB air gap. The standard unit BPELC1 is quiet by virtue of a variable speed centrifugal pump, anti-vibration rubber feet and flexible stainless braided connection hoses. The unit comes with a low level pump cut out, level controller. All sets are supplied with pump controls: inverter, pressure transducer and BMS. The level control box provides additional solid state delayed action for cistern (tank) filling, via a solenoid controlled filling arm.

Application

Penthouse (3 storey and taller); Boosting low water pressure; Combi boilers & showers; Fluid Category 5 backflow protection when used with cistern with Type AB air gap.

Product Specification
Specification Clause

A Booster Pump Set shall be installed – model BPE5-16LC1 as manufactured and distributed by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The pump shall be centrifugal with stainless steel impellors and housing. The pump speed shall be varied by an integral inverter to provide a constant pressure. The duty at 100% output shall be 6.0 bar @ 2.0 lt/s and be controlled by a pressure transducer, which is damped with a 24 litre pressure vessel. The unit shall feature a stainless steel base plate and be acoustically attenuated by anti-vibration feet and a stainless steel braided flexible hoses. The set shall incorporate a level controller with a 3 stainless steel electrodes. The electrode holder shall be fitted to the lid of a separate cistern to provide low level pump cut-out, which shall automatically reset once the cistern is sufficiently full.

Data Sheets

Datasheet

bpedatasheet-5.pdf (1.87 MB)

Download

Installation Guide

bpeommanual-1.pdf (668.70 KB)

Download

Additional Information

AM135F_BT_WIRING_DIAGRAM_VAR_SPEED_DUTY_STANDBY_23.pdf (194.52 KB)

Download
X