Drip Tray for Midi range Stainless

Stainless steel 304 Drip Tray. Catches any water discharged through weir if inlet valve is faulty and overflow blocked. Not suitable for use with the BTCAB4 Wall Cover.

Catches any water discharged through weir if inlet valve is faulty and overflow blocked.

• Powered No

A Break Tank and Booster set with a hygienic Type AB air gap “Boost-A-Break” shall be installed – model BTAB9001 – as manufactured and distributed by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The unit shall have an 18 litre cistern, with a lid, screened weirs, cistern drip tray requiring a DN40 overflow. The pump shall be centrifugal with stainless steel impellors and housing with an output pressure of 2.7 bar @ 1 Lt/s and a closed valve head of 4.52 and be controlled by a pressure switch connected to a 24 litre pressure vessel. The cistern level shall be controlled automatically by a servo solenoid valve operated via stainless steel conductive electrodes and controller. A low-level pump cut-out shall be controlled by electrodes in the cistern, which shall automatically reset once the cistern is sufficiently full. The cistern shall feature a high-level alarm linked to a volt free BMS relay – model BTBMS1. The unit shall feature a stainless steel base plate and be acoustically attenuated with anti-vibration feet and stainless steel braided flexible hoses. A 22 mm3 supply is required, which must maintain a dynamic pressure of 1.2 bar4.

Amend as required
[1] 700 or 900 or 1200 or 4-2 or 4-3 or 4-4
[2] 1.9 bar @ 1 Lt/s and a closed valve head of 3.3 bar (model 700)
[2] 3.3 bar @ 1 Lt/s and a closed valve head of 5.7 bar (model 1200)
[2] 1.8 bar @ 1 Lt/s and a closed valve head of 2.4 bar (model 4-2)
[2] 2.7 bar @ 1 Lt/s and a closed valve head of 3.4 bar (model 4-3)
[2] 3.6 bar @ 1 Lt/s and a closed valve head of 4.5 bar (model 4-4)
[3] 28 mm (standard on model 1200, optional on others)
[4] 1.0 bar (where 28 mm supply specified)