Hose Tap Guard

Guarded hose outside tap with stainless steel supply pipe cover. The tap and supply pipe are foam insulated and therefore reasonably well frost protected. The assembly should be fixed to an exterior wall and supply pipe is run vertically up the outside of the wall from the ground. The 800 mm long pipe cover is attached to the wall with four stainless steel screws. This pipe cover is intended to run to the ground, thus mechanically and environmentally protecting the supply pipe and insulation. The assembly includes a servicing valve, Double Check valve, insulation, ten stainless steel fixing screws and inlet connection.

Fluid Categories 1-3 including- Private, residential & public gardens; Retail parks; Golf courses & bowling greens; Schools and car parks.

• Material Stainless Steel
• Retractable Shelf No

Where indicated on the drawing, a Hose Tap enclosed in a compact stainless steel box with pipe cover “Tap Guard” shall be installed – as manufactured by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk.  The supply pipe shall be 25 MDPE – model HUTG15x25[1].  The assembly shall incorporate a servicing valve and Double Check Valve for Fluid Category 3 protection.  When used to supply a porous irrigation hose, the manufacturer’s DB Pipe Interrupter and Hose Shield shall be provided – model DB20ILS15[2].  A weatherproof padlock with two keys shall be provided to secure the hinged lid – model SP35[3].

Amend as required
[1] 20 MDPE – model HUTG15x20 or HUTG15x22
[1] surface (bottom) entry – model HUTBSXX [where XX, 15C (15 compression), 20 or 25 (MDPE)]
[1] top entry – model HUTBT15
[2] Delete if not required.  For 20 mm hose – model DB20ILS20
[3] Delete if not required or combination padlock available – model SPCP1