Code: HUTGT15 Categories: ,

Hose Tap Guard Top Entry

From £320.00 £384.00 inc. vat


Guarded hose outside tap with stainless steel supply pipe cover. The tap and supply pipe are foam insulated and therefore reasonably well frost protected. Model HUTGT is top entry, where the supply runs down from the ceiling to the tap. An additional 800 mm long pipe cover is available if the standard 800 cover is too short. The assembly includes a servicing valve, Double Check Valve, insulation, ten stainless steel fixing screws and inlet connection.


Fluid Categories 1-3 including- Private, residential & public gardens; Retail parks; Golf courses & bowling greens; Schools and car parks. k

Product Specification
  • Material Stainless Steel
  • Retractable Shelf No
Specification Clause

Where indicated on the drawing, a Hose Tap enclosed in a compact stainless steel box with pipe cover “Tap Guard” shall be installed – as manufactured by Arrow Valves Ltd – Tel 01442 823123  The supply pipe shall be 25 MDPE – model HUTG15x25[1].  The assembly shall incorporate a servicing valve and Double Check Valve for Fluid Category 3 protection.  When used to supply a porous irrigation hose, the manufacturer’s DB Pipe Interrupter and Hose Shield shall be provided – model DB20ILS15[2].  A weatherproof padlock with two keys shall be provided to secure the hinged lid – model SP35[3].

Amend as required
[1] 20 MDPE – model HUTG15x20 or HUTG15x22
[1] surface (bottom) entry – model HUTBSXX [where XX, 15C (15 compression), 20 or 25 (MDPE)]
[1] top entry – model HUTBT15
[2] Delete if not required.  For 20 mm hose – model DB20ILS20
[3] Delete if not required or combination padlock available – model SPCP1

Data Sheets


hutbgdatasheet-5.pdf (899.71 KB)


Installation Guide

hutbgo_mmanual_85.pdf (955.99 KB)


Approval Certificate

HUTB-HUTG-SPTB-2001738-1-3.pdf (2.12 MB)