HUTB Installation Kit 22 mm

Tap Box installation kit (model HUTB22 only) includes: servicing valve, double check valve, tectite elbow (since soldering not permitted), brass hose connector and fasteners.

Model HUTB only, Installation Kit includes- Servicing valve, Double Check Valve, Tectite elbow (since soldering not permitted), brass hose connector and fasteners.

• Retractable Shelf No
• Size 22 mm

Where indicated on the drawing, a Hose Tap enclosed in a compact stainless steel “Tap Box” shall be installed – as manufactured by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The supply pipe shall be 22 mm rear entry – model HUTB221. A separate servicing valve must be provided by the installer to enable maintenance of the assembly and appropriate backflow protection is required. Where the application is no greater than Fluid Category 3, a Double Check Valve Assembly shall be fitted, which where appropriate shall be fitted inside the thermal envelope of the building. When used to supply a porous irrigation hose, the manufacturer’s DB Pipe Interrupter and Hose Shield shall be provided – model DB20ILS152. A weatherproof padlock with two keys shall be provided to secure the hinged lid – model SP353.

Amend as required
[1] 15 mm rear entry – model HUTB15
[1] surface (bottom) entry – model HUTBSXX [where XX, 15C (15 compression), 20 or 25 (MDPE)]
[1] top entry – model HUTBT15
[2] Delete if not required. For 20 mm hose (22 mm Tap Box) code DB20ILS20
[3] Delete if not required or combination padlock available – model SPCP1