Replacement Solenoid & Fittings for 1″ Filling

DN25 Break Tank Solenoid Filling Valve, for use with the BTAB and BTAF 1200, 3-10, 5-4, 5-8, 5-10 and 5-16. Also for use with the BTAB 4-2, 4-3 and 4-4. The additional fittings allow for a straightforward replacement of an existing faulty Solenoid Valve. The assembly consists of the Solenoid Valve, Plug and Coil, Isolating Valve and Threaded Brass Elbow.

• Backflow Prevention No
• Electrical Yes
• Isolating Yes
• Size DN25

A Break Tank and Booster set with a hygienic Type AB air gap “Boost-A-Break” shall be installed – model BTAB9001 – as manufactured and distributed by Arrow Valves Ltd – Tel 01442 823123 www.arrowvalves.co.uk. The unit shall have an 18 litre cistern, with a lid, screened weirs, cistern drip tray requiring a DN40 overflow. The pump shall be centrifugal with stainless steel impellors and housing with an output pressure of 2.7 bar @ 1 Lt/s and a closed valve head of 4.52 and be controlled by a pressure switch connected to a 24 litre pressure vessel. The cistern level shall be controlled automatically by a servo solenoid valve operated via stainless steel conductive electrodes and controller. A low-level pump cut-out shall be controlled by electrodes in the cistern, which shall automatically reset once the cistern is sufficiently full. The cistern shall feature a high-level alarm linked to a volt free BMS relay – model BTBMS1. The unit shall feature a stainless steel base plate and be acoustically attenuated with anti-vibration feet and stainless steel braided flexible hoses. A 22 mm3 supply is required, which must maintain a dynamic pressure of 1.2 bar4.

Amend as required
[1] 700 or 900 or 1200 or 4-2 or 4-3 or 4-4
[2] 1.9 bar @ 1 Lt/s and a closed valve head of 3.3 bar (model 700)
[2] 3.3 bar @ 1 Lt/s and a closed valve head of 5.7 bar (model 1200)
[2] 1.8 bar @ 1 Lt/s and a closed valve head of 2.4 bar (model 4-2)
[2] 2.7 bar @ 1 Lt/s and a closed valve head of 3.4 bar (model 4-3)
[2] 3.6 bar @ 1 Lt/s and a closed valve head of 4.5 bar (model 4-4)
[3] 28 mm (standard on model 1200, optional on others)
[4] 1.0 bar (where 28 mm supply specified)